972-840-0208

S724

S724

  • Kollmorgen S724
  • Kollmorgen S724 front panel

S724

Servo Amplifier

The S724 is manufactured by Kollmorgen and is used to power our Servo Spindles. This amplifier powers the servo spindle, provides feedback, and controls the spindle speed. There are several standard and optional control protocols for connecting to the drive.

Standard:

  • +/- 10VDC Analog
  • 24VDC
  • EtherCAT
  • CANopen
  • RS232

Optional Protocols:

  • Profibus
  • Sercos
  • Devicenet
  • Synqnet
  • 2CAN

Our recommendation, and what the majority of our customers employ, is the analog/discrete solution. For this, the unit requires an analog +/- 10V signal to control the spindle speed. Then, 24VDC signals are used for the “enable” and the “ready to operate”. If your application needs three speeds or less, then 24VDC inputs can be configured to change the spindle's rpm.

Alternatively, we have a turn-key UL certified EthernetIP panel. The SMFBCON allows the spindle to be controlled via a remote PLC or robot controller using an Ethernet IP fieldbus connection.

What Are You Waiting For? Get in Touch With Our Application Engineers Today!

With 1000’s of systems sold, we have the equipment needed to make your project a success. Our application engineers are ready to learn about your process and help recommend the right products for your robotic surface finishing system.

Get a Quote