The PushCorp SWS100-3.7 Servo Weld Shaver has the power and capability to transform a largely varying profile into a consistent predetermined surface slightly above or below the surrounding parent metal.  The Big Weld Shaver is ready to take on most metals, including cast iron, carbon steel, and stainless steel.  This unit excels at removing weld beads and casting parting lines.

The SWS100-3.7 uses a six inch diameter slotting cutter positioned by adjustable rolling guide wheels.  The guide wheels can be manually adjusted and set, or with the new Auto-Adjust option, varied automatically during the weld shaving process.  This allows the cutter to machine away the exact amount of material desired.  The twelve replaceable carbide cutter inserts ensure a consistent, smooth cut and long life.  Easy access to the inserts allows them to be changed in a matter of minutes.

FEATURES

3.7 hp (2.8 kW) Servo Motor

0 - 1,600 RPM Cutter Speed (5% variation max.)

2:1 Belt Reduction

Standard Slot Cutter and Replaceable Inserts

Precision Depth Adjustment from ±0.1 inch (±2.5mm)

Mounts on an AFD1100/80 Adjustable Force Device

All fittings, fasteners, and threaded holes are METRIC

  TOOL SPECIFICATIONS:

Power: 3.7 hp (2.8 kW)
Continuous Torque: 8.9 lb.-ft. (12.1 N·m)
Maximum RPM: 3300 RPM
Supply Voltage: 250 VAC, 3f, 50 / 60 Hz
Tool Weight:  55 lbs. (25 kg)

Requires power supply, amplifier and cables.
Call for appropriate ordering information.

  CUTTER SPECIFICATIONS:

Diameter: 6 inch
No. Inserts:  12
Cutter Insert Type: CTA-8
Cutting Width: .982 - 1.265 in. (25 - 32mm)

Specifications subject to change without notice.

The SWS100-3.7 may now be ordered with an Auto-Adjust option.  This allows the depth of cut to be adjusted automatically, without stopping the weld shaving process.  The Auto-Adjust uses a lead screw driven by a stepper motor to precisely lift or lower the Guide Wheels of the SWS100-3.7.

Adjustment Resolution:  0.0003 in./step (0.008 mm/step)
Adjustment Range: ±0.1 in (±2.5 mm)