The PushCorp STC0610 High Torque Servo Tool Changer is an ideal solution for your heavy duty applications.  The STC0610 has a powerful 10 horsepower (7.5 kW) Servo Motor and integral Collet clamping to give you the muscle, speed control, and holding torque to perform many operations.

The Collet accepts a 1.0 inch (25.4mm) diameter Tool Shaft.  Your custom Tool Shafts make it possible to utilize a wide range of abrasive disks, wheels, drill bits and cutting tools.  The Collet mechanism has ample holding torque while, at the same time, providing a fast-acting release for rapid tool changes.

The STC0610 is designed to mount directly on the PushCorp AFD1100/80 Series Compliant Force Devices.  The STC0610 may also be mounted directly to the robot with no compliant device, providing a low cost machining center with a large work volume.

STC0610 on AFD1100-2

FEATURES

	Mounts directly to the AFD1100/80 Series
	10 horsepower (7.5 kW) servo motor (Liquid Cooling Required)
	6000 maximum RPM (Reversible)
	Sealed ceramic bearings for long service life
	PushCorp proprietary high-speed shaft seal
	± 5% speed regulation
	22 lb.-ft. (30 N·m) minimum Collet holding torque
	Fail-safe pneumatic Collet release
	1.00 inch (25.4 mm) Tool Shaft diameter
	All fittings, fasteners, and threaded holes are METRIC

Power: 10.0 hp (7.5 kW)*
Continuous Stall Torque: 10.7 lb.-ft. (14.5 N·m)*
Speed Range: 60-6000 RPM
Speed Regulation: ±5% (Reversible)
Tool Weight: 72 lb. (32.6 kg)  Dry
* Liquid Cooled

Requires power amplifier and cables.
Call for appropriate ordering information.

  COLLET SPECIFICATIONS:

Holding Torque: 22 lb.-ft. (30 N·m) Min.**
Tool Shaft: 1.00 inch (25.4 mm) diameter
Clamping Supply Air:
   Dry, Non-lubricated,
   90 psi (6.2 bar) Minimum
   100 psi (6.9 bar) Maximum

Specifications subject to change without notice.