The PushCorp STC0605 High Torque Servo Tool Changer is an ideal solution for your fully automated workcell.  The 6000 rpm STC0605 has a powerful 5 hp (3.8 kW) Servo Motor and integral Collet clamping to perform sanding, grinding, drilling and routing operations with ease.   The small size and low weight make this unit ideal for robotic applications.

The Collet accepts a .500 inch (12.7mm) diameter Tool Shaft.  Your custom Tool Shafts make it possible to utilize a wide range of abrasive disks, wheels, drill bits and router bits.  The Collet mechanism has ample holding torque while, at the same time, providing a fast-acting release for rapid tool changes.

The STC0605 is designed to mount directly on the PushCorp AFD1000/70 Series Compliant Force Devices.  The STC0605 may also be mounted directly to the robot with no compliant device, providing a low cost machining center with a large work volume.

*New* Random Orbital/DA Sanding Solutions

STC0605 on AFD1000-2

FEATURES

	Mounts directly to the AFD1000/70 Series
	5.0 horsepower (3.8 kW) servo motor (Liquid Cooling Required)
	6000 maximum RPM (Reversible)
	Small size and low weight
	Sealed ceramic bearings for long service life
	PushCorp proprietary high-speed shaft seal
	± 5% speed regulation
	10 lb.-ft. (20 N·m) Collet holding torque
	Fail-safe pneumatic Collet release
	0.5 inch (12.7mm) Tool Shaft diameter
	All fittings, fasteners, and threaded holes are METRIC

Power: 5.0 hp (3.8 kW)*
Continuous Stall Torque: 5.6 lb.-ft. (7.6 N·m)*
Speed Range: 60-6000 RPM
Speed Regulation: ±5% (Reversible)
Tool Weight: 25 lb. (11.3 kg) Dry
* Liquid Cooled

Requires power amplifier and cables.
Call for appropriate ordering information.

  COLLET SPECIFICATIONS:

Holding Torque: 10 lb.-ft. (20.3 N·m) Min.**
Tool Shaft: 0.500 inch (12.7mm) diameter
Clamping Supply Air:
   Dry, Non-lubricated,
   90 psi (6.2 bar) Minimum
   100 psi (6.9 bar) Maximum

Specifications subject to change without notice.

The STC0605 at work

Mounting Configurations

Parallel Mount

Perpendicular Mount