The PushCorp STC0320 High Torque Servo Tool Changer is the largest and most powerful motor PushCorp offers.  The 3,000 rpm STC0320 has a powerful 20 hp (14.9 kW) Servo Motor with integral tool clamping to perform grinding, drilling, and machining operations with ease.

The STC0320 is designed to use standard BT40 Toolholders.  This makes a very wide variety of machine tools available for use.  The keyed shaft also prevents the Toolholder from slipping allowing full torque to be applied.

The STC0320 is designed to mount directly on the PushCorp AFD1200/90 Series Compliant Force Devices.  The STC0320 may also be rigidly mounted directly to a hi-capacity robot with no compliant device, providing a low cost six axis machining center with a large work volume.

Rigidly Wrist Mounted STC00320

FEATURES

	Mounts directly to the AFD1200/90 Series
	20 horsepower (14.9 kW) servo motor (Liquid Cooling Required)
	3,000 maximum RPM (Reversible)
	Uses standard BT40 Toolholders
	Sealed spindle bearings for long service life
	PushCorp proprietary high-speed shaft seal
	± 2% speed regulation
	Fail-safe pneumatic Toolholder release
	All fittings, fasteners, and threaded holes are METRIC

Power: 20 hp (14.9 kW)*
Continuous Stall Torque: 42.3 lb.-ft. (57.3 N·m)*
Speed Range: 0-3,000 RPM
Speed Regulation: ±2% (Reversible)
Tool Weight: 180 lb. (82 kg) Dry
* Liquid Cooled

Requires power amplifier and cables.
Call for appropriate ordering information.

  COLLET SPECIFICATIONS:

Toolholder: BT40
Clamping Supply Air:
   Dry, Non-lubricated,
   90 psi (6.2 bar) Minimum
   100 psi (6.9 bar) Maximum

Specifications subject to change without notice.

STC0320