The SM1503 is a 3 horsepower (2.2 kW) servo motor that has been developed as a lower priced alternative to the STC1503.  The SM1503 uses the same 15,000 rpm high speed motor from the STC1503, but without the automatic collet release.  Instead, a manual "ER" Series collet is used to clamp the tool shaft.  This means that operator intervention is required when the media needs to be replaced.  For applications where the abrasive media or the tools have a long life the manual collet is the ideal solution. Four fasteners easily mount the SM1503 on a AFD1000/70 carriage.

*New* Random Orbital/DA Sanding Solutions

SM1503 on AFD72-2

FEATURES

	Mounts directly to the AFD1000/70 Series
	3.0 horsepower (2.2 kW) servo motor (Liquid Cooling Required)
	15000 maximum RPM (Reversible)
	Sealed ceramic bearings for high rotational speeds
	PushCorp proprietary high-speed shaft seal
	± 5% speed regulation
	Manual "ER" Series collet
	Collets available from 1/16 - 1/2 inch (1 - 12 mm)
	All fittings, fasteners, and threaded holes are METRIC

Power: 3.0 hp (2.2 kW)*
Continuous Stall Torque: 2.57 lb.-ft. (3.5 N·m)*
Speed Range: 60-15000 RPM
Speed Regulation: ±5% (Reversible)
Tool Weight: 12 lb. (5.4 kg)
* Liquid Cooled

Requires power amplifier and cables.
Call for appropriate ordering information.

  COLLET SPECIFICATIONS:

Standard ER-20 Collet


Specifications subject to change without notice.

Mounting Configurations

Parallel Mount

Perpendicular Mount