The SM0610 is a 5.0 horsepower (3.8 kW) servo motor that has been developed as a lower priced alternative to the STC0610.  The SM0610 uses the same 6,000 rpm high torque motor from the STC0610, but without the automatic collet release.  Instead, a manual "ER" Series collet is used to clamp the tool shaft.  This means that operator intervention is required when the media needs to be replaced.  For applications where the abrasive media or the tools have a long life the manual collet is the ideal solution.

The SM0610 is designed to mount directly on the PushCorp AFD1100/80 Series or AFD1200/90 Compliant Force Devices.  The SM0610 may also be mounted directly to the robot with no compliant device, providing a low cost machining center with a large work volume.

SM0610 on AFD1200-2

FEATURES

	Mounts directly to the AFD1100/80 Series & AFD1200/90 Series
	10 horsepower (7.5 kW) servo motor (Liquid Cooling Required)
	6000 maximum RPM (Reversible)
	Sealed ceramic bearings for long service life
	PushCorp proprietary high-speed shaft seal
	± 5% speed regulation
	Manual "ER" Series Collet
	Collets available from 1/8 - 1 inch (2 - 30 mm)
	All fittings, fasteners, and threaded holes are METRIC

Power: 10.0 hp (7.5 kW)*
Continuous Stall Torque: 10.7 lb.-ft. (14.5 N·m)*
Speed Range: 60-6000 RPM
Speed Regulation: ±5% (Reversible)
Tool Weight: 52 lb. (24 kg)  Dry
* Liquid Cooled

Requires power amplifier and cables.
Call for appropriate ordering information.

  COLLET SPECIFICATIONS:

Standard ER40 Collet

Specifications subject to change without notice.