The PushCorp RBS372 Series Robotic Belt Sander is a wrist mountedable, heavy material removal specialist. The RBS372 combines closed-loop servo motor speed control technology with long lasting belt media. The RBS372 has been designed from the ground up as a mid-sized belt sanding unit with many new and unique features. The RBS372 may be used to sand in three different ways, on its large steel platen, on the 7 inch (178 mm) contact wheel, or in the slack area of the belt media. An important feature of the RBS372 Robotic Belt Sander is the high torque servo motor and timing belt drive. The timing belt drive system provides a 1.2:1 reduction for increased power. The Robotic Belt Sander also includes pneumatic belt media tensioning, and electronic belt media tracking to enable safe, remote operation.

FEATURES

	Accurate belt media speed control
	Standard 3" x 72" belt media
	3 Sanding positions, Platen, Contact Wheel, & Slack Area

	Remote belt media tracking
	Remote belt media tensioning
	All fittngs, fasteners, and threaded holes are METRIC

Belt Width: 3"
Belt Length: 72"
Contact Wheel Diameter: 7"
Servo Motor Power: 5.7 hp (4.28 kW)
Continuous Stall Torque: 8.9 ft.-lbs. (12 N·m) @ Drive Wheel
Maximum Belt Speed: 6719 SFPM
Weight: 83 lbs. (38 kg)
Supply air: Dry, 5µm Filtered, Non-lubricated,
                 80 psi (5.5 bar) min.

The RBS372 may now be ordered with an optional AFD/Amp Stand.  This turns the RBS372 into a passive backstand with a platen.  The AFD/Amp stand includes a table-top AFD81, and control box which houses the amplifier and controls for the RBS372's motor and tracking actuator.

SPECIFICATIONS:

Maximum Applied Force: 100 lb. (445 N)
Force Resolution: 1.4 lbs/psi (90.4 N/Bar)
Compliant Stroke: 1.6 in. (40mm)
Supply air: Dry, 5µm Filtered, Non-lubricated,
                 80 psi (5.5 bar) min.