Random Orbital/Dual Action Sanding
| PushCorp has designed a series of tool
shafts to aid the customer when performing random obital/dual action sanding
operations. These are designed with counter weights and eccentrics based on the
desired sanding disk diameter, and orbit diameter. There are two sets of tool
shafts. One for the standard collapsing collet STC1503/0605, the other for the
STC1503/0605 BT30. Each incorporate a tapered collar for use with a tapered tool
cradle. All are tapped to accept a 5/16-24 Male threaded disks. Disks are
available from 3M to support a wide variety of media including Hook
& Loop, Hookit™, Hookit™ II, and Stikit™, in various thicknesses &
durometers. The following charts show the appropiate PushCorp Assembly number for a desired Sanding Disk Diameter & Orbit Diameter. |
 |
STC1503 on AFD1000-2 DA Sanding |
STC1503/0605 Collapsing Collet - 1/2" Tool Shaft
 *Sanding disk not included* |
Orbit Diameter |
Sanding Disk Diameter |
||
3"-3½" Disk |
5" Disk | 6" Disk | ||
| 3/8" | ASM01963 | ASM01960 | ASM01957 | |
| 3/16" | ASM01964 | ASM01961 | ASM01958 | |
| 3/32" | ASM01965 | ASM01962 | ASM01959 | |
STC1503/0605 BT30 - BT30 Toolholder
 *Sanding disk not included* |
Orbit Diameter |
Sanding Disk Diameter |
||
3"-3½" Disk |
5" Disk | 6" Disk | ||
| 3/8" | ASM01954 | ASM01951 | ASM01948 | |
| 3/16" | ASM01955 | ASM01952 | ASM01949 | |
| 3/32" | ASM01956 | ASM01953 | ASM01950 | |
 |
 |
 |
PUSHCORP, INC. P.O. Box 181915 • Dallas • Texas • 75218 • (972) 840-0208 • FAX (972) 840-1046